Universal Remote Control (URS) DMS-AV TSP20007.10.14 - Manual (Page 26)

Page 27
Control Output Triggers / Amp Enable
The Control Out / Amp Enable outputs are standard 3.5 mm (mono mini) jack
connections used for triggering such pieces as amplifiers, screens, relays, etc.
The output is a 100 mA 12 VDC signal. The voltage trigger outputs are active
when the DMS-AV is selected to a specific input. The trigger input for each
control output is set in the on-screen display, or within the URC Accelerator
application. Shown below is control Trigger 1 and Trigger 2 connection to the
trigger input on an amplifier.
Reset
Pressing the Reset button will return the DMS-AV to its factory default state.
Video Processing
Detail Enhancement
Detail enhancement brings out the fine detail in scenes and is important for SD
and HD material. For example, it’s possible to see blades of grass, small details
on jackets, and wrinkles on faces. When combined with Noise Reduction and
Advanced Scaling, DMS-AV Detail Enhancement can make regular DVDs
approach the quality of high-definition DVDs.
Mosquito Noise Reduction
Satellite and cable providers, as well as DVR recorders, compress the video
signal to get the maximum content into the smallest space. The DMS-AV
delivers high-quality Mosquito Noise Reduction to remove the noise and artifacts
caused by this compression.
DMS-AV H
OME
T
HEATER
A
MPLIFIER
Control output 1 connection to an amplifier