Universal Remote Control (URS) DMS-AV TSP20007.10.14 - Manual (Page 24)

Page 25
Audio Output Connection – Subwoofer(s)
The DMS-AV supplies two subwoofer (.2) outputs. Connect the subwoofer
output(s) to the input on the subwoofer(s). The diagram shows how the receiver
may be connected to active subwoofer(s).
Audio Output Connection - Optical Digital Record
The optical digital output will output the S/PDIF optical digital signal of the
source selected on the receiver. If you wish to record both analog and digital
sources you must connect both analog and digital outputs to your recorder. The
DMS-AV does not convert digital audio to analog audio nor does it convert
analog audio digital audio.
Audio Output Connection - Analog Record
A stereo pair of analog RCA outputs for use with an analog recording device. If
you wish to record both analog and digital sources you must connect bot
hanalog and digital outputs to your recorder. The DMS-AV does not convert
digital audio signals to analog audio recording signals, and does not convert
analog audio signals to digital audio recording signals. The DMS-AV does not
convert digital audio to analog audio nor does it convert analog audio digital
audio.
DMS-AV H
OME
T
HEATER
A
MPLIFIER
Subwoofer outputs connection to
subwoofers powered amplifer