Universal Remote Control (URS) THZ-100 - Manual (Page 19)

Page 15
THZ-100 T
HERMOSTAT
Selecting Hold
If you desire to hold a particular desired temperature indefinitely, use
the arrow keys to move the highlight bar to Hold.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to select this new mode. If you decide to cancel the
operation then press the key below the Go Back key label in the smart-key
label at the bottom left of the display.
Alternately, if you let the programs screen time out with Hold highlighted,
by the highlight bar, the hold mode is selected.
On the main screen, Hold displays above the current temperature
information. In addition, a Hold Off short cut key is displayed in the
smart-key label at the bottom right of the display. Pressing the Hold
Off key turns the hold mode off.
The main screen also has the short cut key on the bottom right to activate
the Hold mode without having to go to the Programs screen. This key
toggles between Hold and Hold Off.