Universal Remote Control (URS) KP-900 - Manual (Page 5)

Page 2
KP-900 O
WNERS
M
ANUAL
Optional RF “No Rules” Operation
In combination with a Complete Control RF Base Station, the KP-900 can
control your system without being in line-of-sight of the equipment. On the
wall or off, that means that you never need to point the KP-900.
The MSC-400, the MRF-350 and the MRF-260 RF base stations are compati-
ble with the KP-900. All incorporate RF addressing. RF addressing gives you
the ability to control equipment locations throughout your home, even if they
are concealed in other rooms or are behind closed doors.
3. The base station routes IR commands to the correct IR
Flasher.
2. The RFX-250 RF Sensor can be freely
positioned for optimal reception.
1. The KP-900 sends radio
waves in every direction, so
you don’t have to point the
remote anymore!
4. Self-adhesvie “Flashers” affix to the
Infrared sensors on the front panels of
your components. The Flashers relay
commands to components. The flashers
plug into the base station’s rear flasher
line outputs via their 10 foot cables.
Uniquely, URC base stations can also
connect to rear panel IR Inputs via their
adjustable IR Line Outputs.