Filter, Chapter 21: filtering ( filter ) – Torbal IP68 Rated User Manual
Page 47
- 47 -
This function is used when vibration is encountered during weighing. This may be the result of ground
vibration, or a vibrating live load on the pan. Increasing the filter setting will increase the time required for a
measurement. The integration time of the measurement is increased thereby eliminating higher frequency
vibration.
1. Press the MENU key, when the option “Filter” is displayed press the T key.
2. The scale will display options “Off” and available filter sensitivity levels “Fil 10, Fil 20, Fil 30 and Fil
40”. To select and enable Filtering press the T key when a desired filter level is displayed.
Filter Sensitivity
Fil 10
Low
Fil 20
Medium
Fil 30
High
Fil 40
Severe
3. To disable filtering select “Fil Off” from the filter menu.
Chapter 21: Filtering (FILter)
fILTER
FIL 10
FIL 20
FIL 30
FIL 40