Torbal AGS100 250C PRO Manual - Manual (Page 46)

46
If any of the following errors are displayed, please contact technical support at (973)-473-6900:
EEPROM1 Error
EEPROM1 memory error (shortage of memory, memory is damaged, or
check sum error)
EEPROM2 Error EEPROM2 memory error (shortage of memory, memory is damaged, or
check sum error)
EEPROM Error!
EEPROM1 or EEPROM2 memory error
CRC Error xx Check sum error number xx in EEPROM memory
Service switch OFF! Attempt to access the Service mode with the Service Switch in the OFF
position
A/D range exceeded! A/D converter range exceeded
A/D converter read error! No response from A/D converter
Temperature sensor error! No response from the temperature sensor
Service switch ON!
Attempt to access the Service Mode without a service command