Torbal BTA Series - Manual (Page 10)

- 9 -
1. Carefully remove the scale, pan, and all of its components out of the packaging. Place them on a stable
surface where the scale will not be affected by any mechanical vibrations or high air movements.
2. After removing the pan base and the pan from their packaging, carefully install the pan base (2) onto
the scale by seating it on the pan support located in the middle of the scale. Once the pan base has
been installed, carefully place the pan (1) on the base
3. Once the pan has been installed, level the scale by adjusting the front feet (6) until the level indicator
(7) shows the “air bubble” is in the center position of the sight glass. The level indicator is located on
the rear left side of the scale.
4. After leveling the scale, you may plug the AC adaptor to the AC adaptor socket located in the rear of
the scale.
Correct Incorrect
Chapter 5: Unpacking the Balance and Getting Started