Accessory board configuration, Introduction – ThingMagic M5e User Manual

Page 4

Accessory Board Configuration

Introduction

This document describes the ThingMagic M5e Module Accessory hardware and how to
configure them for use with the M5e Embedded Module. These accessories are primarily
designed for use with the M5e Module but can also be used with the M5e-Compact
(except the heatsink) with minor modifications to the instructions.

These accessories allow developers to quickly create prototypes and products to meet a
wide variety of applications.

The

4 Port Multiplexer Board

allows one M5e module to support up to 8 ports (using

two multiplexers); compatible with M5e antenna detection and search algorithms.

The

Power/Interface Board

converts the M5e serial interface to high speed USB and

conditions incoming DC power to support in-vehicle or AC powered applications.

The M5e heatsink allows use of the M5e module in environments where continuous

reading or high ambient temperatures are required.

The optional hardware

Accessory Parts Kit

contains sufcient interconnect cables and

mounting/spacing hardware to create an 8-port reader “stack”.