Accessory parts kit, A, b, c: m/f standoffs, m3, 10 mm, D: mmcx to u.fl (ipx) cable, rtang plug – ThingMagic M5e User Manual

Page 14: E: m3 pan-head screws, 6 mm (din 7985), F: m3 flat lockwashers (din 7980), G: 2” ribbon cable, 12 pos, 1mm pitch, Dware

Accessory Parts Kit

Accessory Board Configuration

Accessory Parts Kit

The following parts are included in the optional parts kit which provides all the necessary
parts to build up an 8-port multiplexer using two

, a

, a heat sink and an M5e. The label before each part refers to its location in the full

assembly as show in the

A, B, C: M/F Standoffs, M3, 10 mm

Notes: Stand-offs for first multiplexer, second multiplexer and power/interface board.

Part Number: Digi-Key 24337K-ND

D: MMCX to U.FL (IPX) cable, RTANG Plug

Notes: RF Cable for multiplexer

Part Number: Lighthorse Technologies CB1.32-IPX-MCLMGT-1.5”-NH

E: M3 pan-head screws, 6 mm (DIN 7985)

Notes: Screw for top board

Part Number: Digi-Key H742

Part Number: McMaster-Carr 92005A116

F: M3 Flat Lockwashers (DIN 7980)

Notes: Washer for top board

Part Number: McMaster-Carr 91111A118; 100 for $1.43

G: 2” Ribbon Cable, 12 pos, 1mm pitch

Notes: Only short cables needed if power/interface board mounted upside-down as
are multiplexers.

Part Number: Digi-Key WM10003-ND (Molex 21039-0269)