Alternate gpio interface (block j7), Alternate power input (block j1), Eu regulatory warning – ThingMagic M5e User Manual

Page 13

Text mode
Original mode

Power/Interface Board

Accessory Board Configuration

Alternate GPIO Interface (Block J7)

Terminal block J7 provides a TTL interface for reading and controlling the GPIO lines of
the module (via Molex-style connectors).

Alternate Power Input (Block J1)

Terminal block J1 is used to bring DC power (7 to 24 V) into the module through a Molex-
style connector as an alternative to using the round 2.1mm jack.

EU Regulatory Warning

W A R N I N G !

The Power / Interface board does not pass EU regulations for
unintentional radiation without additional shielding. It does pass FCC
regulations.