ThingMagic Mercury API v1.23.0 - Manual (Page 66)

Configuring Readers
66 Level 2 API

M5e Notes - The module always boots into 9600 baud resulting in a connection delay
due to the first attempt of connecting at the default /reader/baudRate of 115200. This
delay can be avoided by setting /reader/baudRate to 9600 before calling
Reader.Connect() then setting it again to the desired faster rate after the connect.

M6e Notes- The M6e boot baud rate can be modified. If the M6e boot baud rate is
changed it is recommended to set /reader/baudRate to the saved M6e boot baud
rate prior to Reader.Connect() to avoid the penalty of trying incorrect rates during
auto-detect.
/reader/commandTimeout
Type: int
Default value: 1000
Writable: yes
Products: all
Sets the timeout, in milliseconds, used by Advanced Tag Operations . This timeout specifies
how long the reader will continue to attempt a tag Operation before giving up. If it
succeeds before the specified timeout the operation completes and returns. If it hasn't
succeeded after repeatedly trying for the timeout period, it gives up and returns an
exception.
/reader/licenseKey
Type: Array of bytes
Default value: From reader
Writable: yes (not readable)
Products: M6e
Used to install licensed features, such as additional protocols