Mechanical, Mounting the reader – ThingMagic Vega User Manual
Page 13
Mechanical
ThingMagic Vega Set Up Guide
13
Mechanical
The reader mounting is as shown in
Vega Mechanical (all dimensions in cm)
. The four
mounting holes are designed for M4 screws with lock washers and 15mm x 1.5mm flat
washers.
Figure 2: Vega Mechanical (all dimensions in cm)
Mounting the Reader
To mount the reader on a ceiling or wall, follow these steps:
1. Hold the reader in its mounting location and mark the position of the four mounting
screws.