Wiring instructions for m & p series fans, M & p series mounting instructions – Tjernlund P Series High Pressure Duct Boosters 8504064 Rev 05/98 User Manual
Page 2
MODELS M-4, M-6, M-8, & P-8 BRACKET MOUNTING
MODELS P-4 & P-6 BRACKET MOUNTING
CONNECTION WITH FLEX DUCT
MOUNTING WITH PERFORATED STRAP
CONNECTION WITH RIGID DUCT
MODELS M-4 & P-4
MODELS M-4 & P-4 WITH SPEED CONTROL
MODELS M-6, M-8, P-6 & P-8
MODELS M-6, M-8, P-6 & P-8 WITH SPEED CONTROL
WIRING INSTRUCTIONS FOR M & P SERIES FANS
ENCIRCLE WITH PERFORATED PLUMBER’S
STRAP & SECURE TIGHTLY
USE SHEET METAL SCREWS (1” MAX)
OVER-WRAP WITH DUCT TAPE
1. INSTALL B-SERIES BRACKET
2. MOUNT FAN TO BRACKET WITH SHEET
METAL SCREWS (1” MAX)
USE NYLON TIES OVER-WRAP WITH DUCT TAPE
M & P SERIES MOUNTING INSTRUCTIONS
1. MOUNT BRACKET TO SIDEWALL USING (3) 1” SCREWS.
2. PLACE FAN ON THE TOP OF THE MOUNTING BRACKET AS
SHOWN, SCREW (3) REMAINING 1/4” SCREWS INTO PLASTIC
HOUSING.
NOTE: MAKE SURE FAN IS SECURE BEFORE OPERATING.