Tjernlund GPAK-J,JT,1,1T (Discontinued) 8504013 Rev 3 09/97 User Manual

Tjernlund products, inc

P/N 8504013

REV. 3 9/97

OWNER INSTRUCTIONS, DO NOT DESTROY

Recognize this symbol as an indication of important Safety Information!

NOTE: FLUE GAS TEMPERATURES MUST NOT EXCEED

600

F AT VENT SYSTEM INLET.

THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND
OPERATION OF THIS UNIT. READ THESE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING INSTALLATION OR OPERATION. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY RESULT IN IMPROPER INSTALLATION, ADJUST-
MENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE, ELECTRI-
CAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, OR PERSONAL
INJURY OR PROPERTY DAMAGE.

DO NOT DESTROY. PLEASE READ CAREFULLY AND KEEP

IN A SAFE PLACE ON JOB SITE FOR FUTURE REFERENCE.

MODELS

DESCRIPTION

GPAK-J

FOR GAS APPLIANCES WITH A BTU/HR INPUT OF 120,000 OR LESS

GPAK-JT

FOR GAS APPLIANCES WITH A BTU/HR INPUT OF 120,000 OR LESS
WHICH REQUIRE A POWER VENTER POST PURGE

GPAK-1

FOR GAS APPLIANCES WITH A BTU/HR INPUT FROM 100,000 TO 250,000

GPAK-1T

FOR GAS APPLIANCES WITH A BTU/HR INPUT FROM 100,000 TO
250,000 WHICH REQUIRE A POWER VENTER POST PURGE

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com