Cisco OL-5378-01 - Manual (Page 22)

Chapter 45 Cisco IP Phone Configuration
Configuring Cisco IP Phones
45-22
Cisco CallManager Administration Guide
OL-5378-01
Configuring Speed-Dial Buttons
You use Cisco CallManager Administration to configure speed-dial buttons for
phones if you want to provide speed-dial buttons for users or if you are
configuring phones that do not have a specific user assigned to them. Users use
the Cisco IP Phone User Options windows to change the speed-dial buttons on
their phones.
Log Out Profile This field specifies the device profile used by the device
when no one is logged into the device using Extension
Mobility. Choose an option from the drop-down
selection box. Options include Use Current Device
Settings and Select a User Device Profile. When you
choose Select a User Device Profile, a configuration
window displays for you to choose the user device profile
that was already configured.
Log In User ID This field remains blank until a user logs in. When a user
logs into the device using Extension Mobility, the userid
displays in this field.
Log In Time This field remains blank until a user logs in. When a user
logs into the device using Extension Mobility, the time
that the user logged in displays in this field.
Log Out Time This field remains blank until a user logs in and logs out.
When a user logs into the device using Extension
Mobility, the time that the system will log out the user
displays in this field.
Logout This button displays when a user logs into the device
using Extension Mobility. Click the button to manually
log out the user.
Product Specific Configuration
Tip Click the i button to review product-specific information for these
settings. For additional information on disabling phone settings, see the
“Phone Hardening” section in the Cisco CallManager System Guide.
Table 45-1 Phone Configuration Settings (continued)
Field Description