Smart Power Systems HR-12 50 Hz - Manual (Page 22)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 21 of 54
7. Flush the hoses with fresh hydraulic fluid (Dexron III). Install hoses and tighten hose
ends, using the Hose Installation Guidelines. See Figure 11 for connection
locations
Hose connection locations for HR-12/HR-15 tray assembly
Figure 11
WARNING:
Never operate the system with the pump case drain plugged. Damage to the pump
seals will result. To do so will void the system’s warranty.
Lubricate hose fitting o-rings with clean hydraulic fluid (Dexron III) before
installation to prevent damage to them.