SINGER 580 ROTARY STEAM PRESS - Manual (Page 14)

Functions & Settings
14
13
15
16
17
18
19
20
12
FUNCTIONS & SETTINGS FOR IRONING
This chapter provides information on all the electronic functions of your SINGER® Rotary Steam Iron, as well as recommended
settings for ironing various garments and other items.
FUNCTION OF OPERATOR’S
CONSOLE
Power Switch button
Immediately after the Power Switch button (13) is turned
on, the Power On green LED (18) illuminates. The LED of the
preselected heat setting (14) fl ashes red until the selected
temperature is reached. It then changes to a steady light.
Note: Do not switch off the power until the ironing roller
has been completely raised from the heating shoe.
Remaining Water Level display
The Remaining Water LED (19) illuminates blue if there is
no water, or if there is only 10% water in the water tank.
The water tank must now be fi lled before any further steam
ironing is done.
Descaling Granulate Used display
The Descaling Granulate Used LED (20) illuminates blue
when the descaling granulate in the lime descaling cartridge
has been used up.
Heat Settings buttons
The red LED of the preselected Heat Setting (14) fl ashes
when the Rotary Steam Iron is switched on. Select the requi-
red heat setting for ironing and wait until the corresponding
LED shows a steady red light. If a new temperature setting is
selected (including a lower setting), the corresponding LED
fl ashes until the selected temperature is reached. The Rotary
Steam Iron has fi ve diff erent heat settings: Synthetic, Silk,
Wool, Cotton and Linen.
Note: Ironing with steam is not possible at heat settings of
Synthetic and Silk. This is indicated by symbols on
the Operator’s Console.
Continuous Steam button
When Continuous Steam (15) is pressed, the LED illuminates
blue. At the same time one of the buttons for steam settings
(17 A, B or C) fl ashes blue until the steam generator has
heated up. The LED then remains illuminated and steam ge-
neration begins. The Rotary Steam Iron now produces steam,
even if the foot pedal is not pressed and it is possible to select
between three steam settings (minimum A, medium B or
maximum C).
Demand Steam button
When the Demand Steam button (16) is pressed, the LED illu-
minates blue. At the same time one of the buttons for steam
settings (17 A, B or C) fl ashes blue until the steam generator
has heated up. The LED then remains illuminated and steam
generation begins. It is now possible to select between three
steam settings: (minimum A, medium B and maximum C).
The Rotary Steam Iron now only produces steam when the
foot pedal is pressed in the B and C position.
Steam Setting buttons
By means of three buttons – 17 A, B and C – it is possible to
vary the amount of steam for the diff erent steam settings:
17A for minimum steam, 17B for medium steam and 17C
for maximum steam. The corresponding LED fl ashes until
the steam generator has heated up. The LED then remains
illuminated and steam generation begins.