SINGER EXPERT FINISH II - Manual (Page 8)

8
Steam Ironing
• Fill the water tank as described in “Filling the Water Tank” section.
• Turn the iron on as described in the “Turning the Iron On and Off” section.
• Select the desired temperature by pressing the Temperature UP (+) and
Temperature DOWN (-) buttons on either side of the LCD Display. An audible
beep will sound each time the temperature is changed.
• A minimum temperature setting of 160º C is required for steam ironing.
• To activate, press the Steam Adjust Button located above the LCD Display to
activate the steam setting . An audible beep will sound.
WARNING: NEVER IRON OR STEAM CLOTHES WHILE THEY ARE BEING
WORN. NEVER DIRECT THE STEAM JET AT PEOPLE OR ANIMALS.
IRONING YOUR GARMENTS
Dry Ironing
• Turn the iron on as described in the “Turning the Iron On and Off” section.
• Dry iron is the automatic setting.
• Select the desired temperature by pressing the Temperature UP (+) and
Temperature DOWN (-) buttons on either side of the LCD Display. An audible
beep will sound each time the temperature is changed.
• When the selected temperature is reached, HEATING on the LCD Display will
stop flashing and disappear, indicating that the iron is ready to use.
• If the steam setting is the current selection, press the Steam Adjust Button
located above the LCD Display to deactivate the steam setting. An audible
beep will sound.
• To iron garments with a dry iron, SINGER ® recommends using this iron with
an empty water tank.