SINGER EXPERT FINISH II - Manual (Page 12)

12
• Turn the iron completely off as described in the “Turning the Iron On and Off”
section.
• Hold the iron horizontally over a sink with the soleplate pointing away from
the body and press and hold the Self-Cleaning Button. Steam and hot water
will drain from the soleplate holes, washing away the scales and minerals that
have built up inside the steam chamber.
• Gently move the iron back and forth until the water tank is empty.
• When self-cleaning is complete, release the Self-Cleaning Button.
• Place iron on its heel and let it cool completely.
• Carefully wipe all water from the soleplate with an old towel, as the water and
minerals may leave stains.
NOTE: Before using the iron after self-cleaning, test the steam and burst of
steam on an old towel or cloth that can be discarded.
Emptying and Storing
• Unplug the iron.
• Place the iron on its heel and allow to cool completely.
• Empty water from the iron before storing.
• To protect the soleplate, store the iron on its heel.
A uto clean
Self-Cleaning Button