Selecting the temperature – SINGER EXPERT FINISH II User Manual
Page 7
7
Selecting the Temperature
• To turn the iron on, plug into a grounded electrical outlet. An audible beep
sound will indicate the iron is on. The LCD Display will illuminate and the
will begin to flash.
• To begin heating, press the Temperature UP (+) button. The LCD Display will
begin to flash HEATING and will indicate the temperature setting. An audible
beep sound will indicate that the temperature is being adjusted.
• Select the desired temperature by pressing the Temperature UP (+) and
Temperature DOWN (-) buttons on either side of the LCD Display. An audible
beep will sound each time the temperature is changed.
• When the selected temperature is reached, HEATING on the LCD Display will
stop flashing and disappear, indicating that the iron is ready to use.
• If steam ironing is desired, a minimum temperature setting of 160º C is
required. To activate, press the Steam Adjust Button located above the LCD
Display to activate the steam setting . An audible beep will sound.
CONSULT THE GARMENT’S LABEL FOR TEMPERATURE INSTRUCTIONS.
WE RECOMMEND USING THE CHART BELOW AS A GUIDE.
Temperature Control Settings
synthetics
silk
wool
cotton
linen
do not iron
MAX