SINGER CE-100 Futura - Manual (Page 34)

34
CONTROL PANEL FUNCTIONS
*Pattern selection buttons
Turn on power switch and push a desired button until it is lit.
*Mirror button MMM
If mirror image is available for selected pattern, push the mirror
button until it is lit.
*Stitch length and width/needle position controls
When a pattern is selected, it will be sewn with recommended
(auto) settings of stitch length and width or needle position for
straight stitch.
Settings of stitch length and width/needle position are indicated
with LED indicator turned on and beep sound, when moving
stitch length and width/needle position controls.
Stitch length and width/needle position can be manually
changed from this position according to your preference.
Mirror button
Touche de miroir
Botón de espejo
Stitch length
control
LED indicator
Témoin a diode
Indicador LED
Pattern selection button
Touches de sélection de point
Botones de selección de puntada
Longueur de point
Control longitud
puntada
Stitch width/
needle position
control
Commande de
largeur de point/
position d’aiguille
Control de ancho
de puntada/
posición de aguja