QOMO QD1200 - Manual (Page 13)

display resolution higher than XGA (1024*768).
2. Operating system: Windows XP SP2 (Service Pack 2).
3. Must use the high-speed USB cable provided together with the
visualizer.
4. When connect the visualizer to a desktop computer with the high-speed
USB cable provided together with visualizer, we recommend using the
USB port on the rear of the mainframe as the USB port on the front of
the computer might have interference.
5. You need to install the USB driver again when you change a
computer’s USB port. If this port has installed USB2.0 driver, then no
need to install USB driver again.
WORKING ON THE STAGE
1. Place your material on the working surface.
2. Select the enlargement required with the “
+ T
” and “
W
” keys.
3. Adjust the focus with the “Near” and “Far” keys or “AUTO” key.
WORKING OUTSIDE THE STAGE
For showing 3-dimensional objects with the visualizer, just place them on
the working surface and adjust the “
+ T
” or “
W
” and “AUTO” keys. If the
object is too big for the stage or you want to show it from the side, just
place it behind or in front of the unit and tilt the camera by hand (please
take off the close-up lens first).
13
Rotate 330 degrees
vertically