ProgressiveRC 8M CellLog - Manual (Page 7)

-7-
Cell Voltage Monitor CellLog 8M
Menu Operation:
1. Select the menu items by <▲> /<▼> buttons, the selected item will be shown in white.
2. Press < > to the following menu, and hold < >for more than 3 seconds, it will return to the upper menu.
Symbol Meanings:
Display Symbols The meaning of the Symbols Note
nS total voltage of the pack n:0-8, the cell count
nH the highest individual cell voltage n:0-8, the highest cell number
nL the lowest individual cell voltage n:0-8, the lowest cell number
▣V the maximum voltage difference between the cells ▣V = nH - nL
HV The voltage maximum value
LV the voltage minimum value
▣P the pack maximum voltage difference ▣P = HV - LV
mmM:ss or hhH:mm the time entering to logging ss:second ,mm:minute ,
hh: hour
⊙/○ Single choice Do/Do not
/□ Multiple choice Do/Do not
T_OVER
Safety time alarm
LOW Low voltage alarm
OVER
Over voltage alarm
DIFF
Voltage difference alarm
Button Function
CellLog has 3 buttons, which everyone owns the first and second functions. The first function is trigger after
only one click; the second function is trigger after 3 seconds holding of the button.
Press button Condition Button Function Description
<▲> Click 1. Turns up the menu
2. Increase the value
3. Select the character input
Hold for 3 seconds Enter to Alarm type select menu
<▼> Click 1. Turns down the menu
2. Decrease the value
3. Delete the character
Hold for 3 seconds Trigger Open/Close Logging Function
< > Click Confirmation
Hold for 3 seconds Enter to System Setting Menu
<▲>+<▼> Click Check holding information
Hold for 3 seconds Save users voltage calibrated value
Note：<▲>+<▼> means pressing <▲> and <▼> at the same time.