Origin Live Aurora MKI - Manual (Page 3)

3
I N T R O D U C T I O N ( R E A D C A R E F U L L Y )
Congratulations on choosing your Origin Live turntable. You now have one of the finest sounding turntables
available – not only will it provide an extraordinary level of performance but also reliability and low
maintenance.
The portions of the instructions printed in
blue are optional reading for more in depth knowledge if necessary.
It is critical that the remainder of the instructions are read fully to achieve the full performance from your
turntable. There are aspects of the deck that run contrary to what you may expect, so before altering anything it
is important to have fully read the manual or degradation will result.
The Aurora turntable is simple to set up. If you have a problem please refer to the instructions. If your problem
persists you should speak to your dealer or have a look at the Origin Live web site
www.originlive.com under
“general information” then “technical support” from the drop down list
The instructions are written for people with no previous experience of turntables. Some sections may therefore
appear lengthy, as they need to cater for all potential questions. When readin g the instructions refer to the
various diagrams for part names and clarity.
The deck can take approximately 15 minutes to set up depending on your expertise. The dc regulator
electronics may initially encounter speed drift when first started (if they have not been run in) and may need at
least 4 hours to run in before the speed can finally be set with accuracy.
We wish you an enjoyable time with your Aurora turntable.
P A R T S L I S T
q Plinth
including 1 cable clip and attachment nut& bolt
Pivot bush, nut and bolt attached.
q Turntable bag
o
Belt
o Oil syringe
o
3mm & 2.5mm Allen keys
o
Tube to extend Allen key
o
3 cork disks
q Platter
q Sub-platter
q Sub-chassis
q Motor housing
q Control box
q Transformer for 230 volt or 110 volt mains supply
q Arm (optional)
P A P E R W O R K
q Turntable instructions
q Strobe card