Oldcastle BuildingEnvelope Solar Eclipse - Manual (Page 18)

18 


S U N C O N T R O L - I N S T A L L A T I O N M A N U A L
SOLAR SHELF ™
Insert panel into top and bottom
of wall mount. Tap lightly with
dead-blow hammer to ensure
panel is fully engaged.
FIGURE 21
Locate panel joint at
centerline of verticals
1/4"
4.7) Install .090" thick aluminum panels into upper and lower receivers. Lightly tap on edge of panel to
secure into track. Place wood block on outer edge of panel and tap into place using dead-blow
hammer. See FIGURE 21. Note: Panels should be cut shelf depth minus 1 7/8" for SS-124 & SS-125,
and shelf depth minus 4 5/8" for SS-119 & SS-123.