Modern AG Competitor - Manual (Page 12)

12 - Competitorrr Cutter
transporting safety
• only tow the implement behind a properly sized and equipped tractor which exceeds the
weight of the implement by at least 20%. Do not tow the implement behind a truck or other
type of vehicle. never tow the implement and another implement connected in tandem.
• make certain before transporting that a “Slow moving Vehicle” (SmV) sign is installed in such
a way as to be clearly visible and legible. When transporting the implement use the tractor
flashing warning lights and follow all local traffic regulations.
• Your driving vision may be reduced or impaired by the tractor, cab, or implement. Before driving
on public roadways identify any limited vision areas, and make adjustments to your operating
position, mirrors, and the implement transport position so that you can clearly see the area
where you will be traveling, and any traffic that may approach you. Failure to maintain adequate
vision of the public roadway and traffic can result in serious injury or even death.
• understand the tractor and implement and how it handles before transporting on streets and
highways. make sure the tractor steering and brakes are in good condition and operate properly.
• transport only at speeds where you can maintain control of the equipment. Serious accidents
and injuries can result from operating this equipment at high speeds. Before transporting the
tractor and implement, determine the proper transport speeds for you and the equipment. make
sure you abide by the following rules:
- test the tractor at a slow speed and increase the speed slowly. apply the Brakes smoothly to
determine the stopping characteristics of the tractor and implement. as you increase the speed
of the tractor the stopping distance increases. Determine the maximum transport speed not to
exceed 20 mph (30 kph) for towing this equipment.
- test the equipment at a slow speed in turns. increase the speed through the turn only after you
determine that it is safe to operate at a higher speed. use extreme care and reduce your speed
when turning sharply to prevent the tractor and implement from turning over. Determine the
maximum safe turning speed for you and this equipment before operating on roads or uneven
ground.
safety seCtion