Modern AG Super Sunshine - Manual (Page 2)

introduction
Your rotary cutter is designed primarily for weed, grass and brush to 2” diameter. With proper
maintenance as described in the manual, your cutter will provide you with years of dependable
service with a minimum of repairs.
It is recommended that all operators of this implement read this manual or be instructed of its
contents as to safety, proper operation, and maintenance before beginning operation.
Your cutter has been assembled for operation with a tractor PtO input speed of 540. Verify your
RPm with your local dealer prior to operation. should you desire to change PtO input speed,
contact your local dealer. this series of cutter is recommended for use with tractors rated at 48 HP.
When ordering parts for the gear boxes and the drivelines, be sure to specify the serial number.
the serial number is located on the angle located on top of cutter.
Chain guards, deflectors, driveline integral shields are standard equipment and need to be used at
all times.