Modern AG 20' Predator - Manual (Page 40)

40 - 20’ Predatorrr
oPERation
Rotary cutter PRE-oPERation inspection
Cutter ID#________________ make ____________________
Date: ________________ Shift ____________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped
and the tractor is in park with the parking brake engaged. Make sure the cutter is resting on
the ground or securely blocked up and all hydraulic pressure has been relieved.
The Operator’s Manual is in the canister on the cutter
all safety decals are in place and legible
the tongue/hitch connection bolts & pins are tight
there are no cracks in tongue or hitch
the tow chain is secured to the tractor & cutter
The hydraulic cylinders pins are tight
there are no leaking or damaged hoses
the cutter deck is clear of cut grass and debris
Chain guards/deflectors are in place & in good condition
Driveline/gearbox shields are in good condition
Driveline clutches are in good condition; not frozen
Driveline telescoping members & u-joints are lubricated
Driveline yokes are securely attached to PtO & cutter
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Blade carrier retaining nut is tight
Blades are not chipped, cracked or bent
Blade bolts are tight
Wheel lug nuts are tight
transport locks are in good condition
Operator’s Signature:
do not oPERatE an UnSafE tRactoR or cutter
Item
condition at
Start of Shift
Specific Comments
if not O.K.