Modern AG 20' Predator - Manual (Page 19)

20’ Predatorrr - 19
oPERation
oPERation inStRUctionS
Rhino FL10m/FL15m rotary cutters are manufactured with quality material by skilled workers. these
cutters are designed to cut grass, weeds, crop stalks, brush and other vegetation up to 4” diameter.
the cutter is equipped with protective deflectors and/or chain guards to prevent objects being
thrown from the cutter by the blades, however, no shielding is 100% effective. all shields, guards,
deflectors, and chains equipped on the unit must be maintained on the cutter in good operational
condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to
take every reasonable precaution to ensure oneself, others, animals, and property are not injured
or damaged by the cutter, tractor, or a thrown object. Do not operate the cutter if passersby, pets,
livestock, or property are within 300 feet of the unit.
this section of the Operator’s manual is designed to familiarize, instruct, and educate safe and
proper cutter use to the operator. Pictures contained in this section are intended to be used as a
visual aid to assist in explaining the operation of a flex-wing rotary cutter and are not necessarily of
a FL10m/FL15m cutter. Some pictures may show shields removed for picture clarity. neVeR OPeRate
this implement without all shields in place and in good operational condition. The operator must
be familiar with the cutter and tractor operation and all associated safety practices before operating
the cutter and tractor. Proper operation of the cutter, as detailed in this manual, will help ensure
years of safe and satisfactory use of the cutter.
iMPoRtant: to avoid cutter damage, retorque all bolts after the first 10 hours of operation.
Retighten blade carrier retaining nut on gearbox lower shafts to 450 ft. lbs.
REad and UndERStand tHE EntiRE oPERating inStRUctionS and SafEty SEction
of tHiS ManUal and tHE tRactoR ManUal BEfoRE attEMPting to USE tHE tRactoR
and cutter. If you do not understand any of the instructions, contact your nearest authorized
dealer for a full explanation. Pay close attention to all safety signs and safety messages contained in
this manual and those affixed to the cutter and tractor.
ReaD, unDeRStanD, and FOLLOW the following Safety messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in
the Safety messages. always use good common sense to avoid hazards. (SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad. (SG-3)
PEligRo