Mercedes-Benz G-Class 2006 COMAND Manual - Manual (Page 219)

213
Info Services*/System settings
System settings
Manually setting date and clock
You must manually set the date and clock,
if
ț COMAND does not receive a GPS time
ț the clock has been disconnected from
the vehicle battery
ț the dates of the change between sum-
mer and winter time are not available
Date/time menu
1 Day, month, year, hours, minutes
Day is highlighted when the menu
appears
̈ Turn the right-hand rotary/push-button
v to highlight “Date/Time...” in the
settings menu (
୴ page 206) and press
to confirm.
The menu displays date and time.
Setting
̈ Press the right-hand rotary/push-
button
v.
The day appears in red letters, setting
mode is active.
Moving the day forward or back
̈ Turn the right-hand rotary/push-button
v to the right or left.
̈ Press the right-hand rotary/push-
button
v.
The day appears in black letters, set-
ting mode is switched off. The cursor
moves one position to the right.
̈ Repeat the operating steps to subse-
quently change month, year, hours and
minutes.
P82.85-7719-31
1