beautypg.com

Door:locking/unlocking, smartkey, Releasing seat belts locking – Mercedes-Benz GL-Class 2007 Owners Manual User Manual

Page 72

background image

71

Getting started

Parking and locking

Releasing seat belts

̈

Press the seat belt release button
(

page 56).

Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.

Locking

̈

Exit the vehicle and close all doors and
the tailgate.

!

Make sure the seat belt retracts fully so that

the seat belt and/or latch plate cannot get
caught or pinched in the door or in the seat
mechanism. This can damage the seat belt and
impair the effectiveness of the seat belt, and/or
cause damage to the door and/or door trim
panel. Such damage is not covered by the
Mercedes-Benz Limited Warranty.

Damaged seat belts must be replaced. Contact
an authorized Mercedes-Benz Light Truck
Center.

Warning!

G

To prevent possible personal injury, always

keep hands and fingers away from the door

openings when closing the doors. Be espe-

cially careful when small children are

around.

Before closing doors, make sure there is no

possibility of someone getting caught in a

door during closing.

Warning!

G

When leaving the vehicle, always remove the

SmartKey from the starter switch, take the

SmartKey with KEYLESS-GO* with you, and

lock your vehicle. Do not leave children un-

attended in the vehicle, or with access to an

unlocked vehicle. A child’s unsupervised

access to a vehicle could result in an

accident and/or serious personal injury.

i

If you hear a warning signal you have

forgotten to switch off the headlamps before
opening the driver’s door.

In addition the message

Switch off lights

appears in the multifunction display.

Switch off the headlamps.

!

Failure to switch off the headlamps when

leaving the vehicle may result in a discharged
battery.