Mercedes-Benz GL-Class 2007 Owners Manual - Manual (Page 145)

144
Controls in detail
Memory function*
The memory button and stored position
buttons are located on the entry side of
each front seat base.
M Memory button
1, 2, 3 Stored position buttons
̈ Switch on the ignition ( ୴ page 42).
or
̈ Open the respective door.
Storing positions into memory
̈ Adjust the seats ( ୴ page 45).
̈ On the driver’s side, additionally adjust
the steering wheel (
୴ page 51) and ex-
terior rear view mirrors ( ୴ page 52) to
the desired positions.
̈ Press memory button M.
̈ Release memory button M and press
stored position 1, 2 or 3 within
3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
̈ Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
!
Do not operate the power seats using
memory button M if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
i Releasing the stored position button stops
movement to the stored positions immediately.