Mercedes-Benz E-Wagon 2007 COMAND Manual - Manual (Page 71)

70
Audio
CD changer* operation
Entry example: Track 1
̈ Press !.
Entry example: Track 12
̈ Press ! and A in quick succession.
̈ Wait approx. 3 seconds after entering
the number.
The selected track is played. The CD
main menu appears.
Selecting via scan search
Scan search is characterised as follows:
ț Scan search plays each track on the
current CD for approx. 8 seconds.
ț Scan search can be ended manually.
ț Scan search automatically stops at the
track listened to before the scan
search was started.
Starting scan search
̈ Press the Scan soft key.
Ending scan search manually
̈ Press the Scan soft key.
The track playing at the time the scan
is ended remains playing.
̈ Open the CD changer main menu
(
୴ page 66).
̈ Press and hold + or ,.
̈ To stop release + or ,.
The following options are available:
ț Normal sequence
The tracks are played in the normal se-
quence (e.g. track 1, 2, 3 etc.).
If only one CD is loaded, the last track is
followed by again playing the first track.
If several CDs are loaded in the CD chang-
er, the last track on a CD in the changer
will be followed by the first track of the
next CD in the changer.
The CDs are changed in their normal se-
quence (e.g. CD 1, 2, 3 etc.).
ț Repeat track
The current track will be repeated until
this function is deactivated.
i
Entries beyond the number of available
tracks on the CD are not possible.
i
When you start the scan search, play-
back option
Normal sequence is activated
automatically. Therein scan search is
restricted to the current CD.
Fast forward/reverse
Playback options