Mercedes-Benz E-Wagon 2007 COMAND Manual - Manual (Page 42)

41
Audio
Radio operation
Ending Scan search manually
̈ Press the Scan soft key again.
Manual tuning
̈ Switch to the desired waveband
(
୴ page 37).
̈ Press and hold + or , for at
least 2 seconds to tune up or down.
Manual tuning is activated.
̈ Keep the button pressed or release it
and keep tapping + or , in
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
̈ Switch to the FM waveband
(
୴ page 37).
̈ Press ..
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
i
Manual tuning is also possible in all
wavebands by pressing # or $.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
ț FM 0.2 MHz
ț AM 10 kHz
୴୴