Mercedes-Benz C-Class 2007 Owners Manual - Manual (Page 374)

373
Practical hints
Replacing bulbs
Front turn signal lamp bulb
̈ Turn bulb socket 3 with the bulb
counterclockwise and remove it.
̈ Press gently onto the bulb and turn it
counterclockwise out of bulb
socket
3.
̈ Press new bulb gently into bulb
socket
3 and turn clockwise until it
engages.
̈ Place bulb socket 3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
̈ Press the clamp on housing cover 2
and remove it.
̈ Pull out bulb socket 5 with the bulb.
̈ Pull the bulb out of bulb socket 5.
̈ Press the new bulb into bulb socket 5.
̈ Press bulb socket 5 back into the
lamp.
̈ Align housing cover 2 and press until
it engages.
Additional turn signal lamp bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to
function, the entire turn signal unit must be
replaced. Have the turn signal unit
replaced by an authorized Mercedes-Benz
Center.
Front side marker lamp bulbs
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
̈ Turn the exterior lamp switch to
position
M ( ୴ page 109).
̈ Open the trunk ( ୴ page 96).
Tail lamp unit
1 Latch ୴୴