Seat adjustment, Controls in detail – Mercedes-Benz CL-Class 2009 User Manual
Page 306
Seats
304
of the head restraint supports the back of
the head at eye level. This will reduce the
potential for injury to the head and neck in
the event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
You can adjust the lumbar support,
multicontour seats for driver and front
passenger, as well as drive-dynamic
multicontour seats using COMAND
(
!
When moving the seats, make sure there
are no items in the footwell or behind the
seats. Otherwise, you could damage the
seats.
Power seats
1
Head restraint height
2
Seat height
3
Seat cushion tilt
4
Seat cushion depth
5
Seat fore and aft adjustment
6
Seat backrest tilt
i
If PRE-SAFE
®
has been activated, the
front passenger’s seat will be moved to a
more favorable seat position.
i
you store the settings for the seat position
together with the settings for the steering
wheel and the exterior rear view mirrors.
X
Seat height: Press the switch up or down
in direction of arrow
2
.
X
Seat cushion tilt: Press the switch up or
down in direction of arrow
3
until your
upper legs are lightly supported.
X
Seat cushion depth: Press the switch
forward or backward in direction of arrow
4
until your legs are supported
comfortably.
X
Seat fore and aft: Press the switch
forward or backward in direction of arrow
5
.
i
When moving the seat fore or aft, the head
restraints may readjust automatically.
X
Seat backrest tilt: Press the switch
forward or backward in direction of arrow
6
.
X
Head restraint height: Press the switch
up or down in direction of arrow
1
.
Adjusting front passenger seat from
driver’s seat
When adjusting the front passenger seat,
make sure the seat, if occupied, is as far
from the front passenger front air bag as
possible.
Controls in detail