Mercedes-Benz G-Class 2013 Owners Manual - Manual (Page 306)

Stainless-steel spare hub cap
X Take the screwdriver out of the vehicle tool
kit (
Y page 302).
X Open the lock on cover ring : with
screwdriver = or a similar tool.
X Fold tab ; down.
X Pull cover ring : apart and remove it.
X Pull off cover panel ?.
i When refitting cover panel ?, make sure
that retainer A engages in recess B.
Removing the spare wheel
The spare wheel is heavy. Take particular note
of this when removing the spare wheel.
X Remove wheel nuts :.
X Remove the spare wheel.
Mounting the wheel
After changing a wheel:
X Repair or replace the damaged wheel as
soon as possible and secure the spare
wheel in place again.
X Secure the damaged wheel on the spare
wheel bracket with wheel nuts :. When
doing so, make sure that the wheel cannot
come loose.
X When refitting cover panel ?, make sure
that retainer B engages in recess
A(
Y page 304).
X Make sure that tab ; is below when
refitting cover ring :(
Y page 304).
X For safety reasons, regularly check to
ensure that the wheel is securely fastened.
Flat tire
Preparing the vehicle
X Stop the vehicle on solid, non-slippery and
level ground, as far away as possible from
traffic.
X Switch on the hazard warning lamps
(
Y page 104).
304
Flat tire
Breakdown assistance