Setting the temperature, Setting the air distribution, Setting the airflow – Mercedes-Benz G-Class 2013 Owners Manual User Manual
Page 133: Activating/deactivating the zone function, Defrosting the windshield, Climate control, Operating the climate control systems
X
Turn the SmartKey to position
2 (
Y
page 139) in the ignition lock.
X
Set the desired temperature.
X
To switch on: press the à button.
The indicator lamp in the à button lights
up. Automatic air distribution and airflow
are activated.
X
To deactivate: press the _ button.
or
X
Press the I or K button.
The indicator lamp in the à button goes
out.
Setting the temperature
You can set the temperature separately for
the driver's and front-passenger sides with
controls : or B(
Y
page 119).
X
Turn the SmartKey to position
2 (
Y
page 139) in the ignition lock.
X
Set control : or B(
Y
page 119) to the
desired temperature.
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Setting the air distribution
X
Turn the SmartKey to position
2 (
Y
page 139) in the ignition lock.
X
Press the _ button repeatedly until the
desired symbol appears in the display.
P
Directs the airflow through the center
vents
O
Directs the airflow through the
footwell air vents
S
Directs the airflow through the center
and footwell vents
¯
Directs air through the defroster vents
b
Canada only: directs the airflow
through the defroster and center vents
a
Directs air through the defroster and
footwell vents
_
Canada only: directs the airflow
through the defroster, center and side
air vents and the footwell
Setting the airflow
X
Turn the SmartKey to position
2 (
Y
page 139) in the ignition lock.
X
To increase: press the K button.
X
To reduce: press the I button.
i
The airflow from the rear-compartment
vents and the center vents is the same.
Activating/deactivating the zone
function
X
To switch on: press the á button.
The indicator lamp in the á button lights
up.
i
The temperature setting for the driver's
side is not adopted for the front-passenger
side and the rear compartment. The
temperature for the front-passenger side
and the rear compartment must be set
separately.
X
To switch off: press button á.
The indicator lamp in the á button goes
out.
i
The temperature setting for the driver's
side is adopted for the front-passenger side
and the rear compartment.
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
i
You should only select the defrosting
function until the windshield is clear again.
Operating the climate control systems
131
Climate control
Z