Driving and parking, Driving systems – Mercedes-Benz G-Class 2013 Owners Manual User Manual
Page 185
=
Specified minimum distance to the
vehicle in front; adjustable
?
Vehicle in front, if detected
In the Assistance menu (
Y
page 218) of the
on-board computer, you can select the
distance display.
X
Select the
Distance Display
function
using the on-board computer
(
Y
page 218).
You will see the stored speed for about five
seconds when you activate DISTRONIC PLUS.
Setting a speed
:
To store the current speed or a higher
speed
;
To store the current speed or a lower
speed
X
Press the cruise control lever up : for a
higher speed or down ; for a lower speed.
X
Keep the cruise control lever pressed until
the desired speed is reached.
X
Release the cruise control lever.
The new speed is stored. DISTRONIC PLUS
is activated and adjusts the vehicle's speed
to the new speed stored.
X
To adjust the set speed in 1 mph
increments (1 km/h increments): briefly
press the cruise control lever up : or
down ; to the pressure point.
Every time the cruise control lever is
pressed up : or down ; the last speed
stored is increased or reduced.
X
To adjust the set speed in 5 mph
increments (10 km/h increments):
briefly press the cruise control lever
up : or down ; to the pressure point.
Every time the cruise control lever is
pressed up : or down ;, the last speed
stored is increased or reduced.
i
DISTRONIC PLUS is not deactivated if you
depress the accelerator pedal. If you
accelerate to overtake, DISTRONIC PLUS
adjusts the vehicle's speed to the last
speed stored after you have finished
overtaking.
Setting the specified minimum distance
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this
function, you can set the minimum distance
that DISTRONIC PLUS keeps to the vehicle in
front, dependent on vehicle speed. You can
see this distance in the multifunction display
(
Y
page 218).
Driving systems
183
Driving and parking
Z