On-board computer and displays, Display messages – Mercedes-Benz G-Class 2013 Owners Manual User Manual
Page 242

Display messages
Possible causes/consequences and M Solutions
Blind Spot Assist
Currently
Unavailable See
Operator's Manual
or
Active Blind Spot
Assist Currently
Unavailable See
Operator's Manual
Blind Spot Assist or Active Blind Spot Assist is temporarily
inoperative. Possible causes are:
R
you have established the electrical connection between the
trailer and your vehicle.
R
the sensors are dirty.
R
function is impaired due to heavy rain or snow.
R
the radar sensor system is outside the operating temperature
range.
R
the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio
stations or other sources of electromagnetic radiation.
The yellow 9 indicator lamps also light up in the exterior
mirrors.
X
When towing a trailer, confirm the display message with a.
If you are driving without a trailer and the display message does
not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Apply the parking brake.
X
Clean the sensors (
Y
page 297).
X
Restart the engine.
If the system detects that the sensors are fully operational, the
display message disappears.
Blind Spot Assist or Active Blind Spot Assist is operational again.
Blind Spot Assist
Inoperative
or
Active Blind Spot
Assist Inoperative
Blind Spot Assist or Active Blind Spot Assist is defective.
The yellow 9 indicator lamps also light up in the exterior
mirrors.
X
Visit a qualified specialist workshop.
DISTRONIC PLUS
Off
DISTRONIC PLUS has been deactivated (
Y
page 177).
If it was deactivated automatically, a warning tone also sounds.
DISTRONIC PLUS
Now Available
DISTRONIC PLUS is operational again after having been
temporarily unavailable. You can now reactivate DISTRONIC PLUS
(
Y
page 177).
240
Display messages
On-board computer and displays