Setting the airflow, Switching the zone function on/off, Defrosting the windshield – Mercedes-Benz CLS-Class 2013 Owners Manual User Manual
Page 133: Max cool maximum cooling, Climate control, Operating the climate control systems

Setting the airflow
Adjusting
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To increase: press the K button.
X
To reduce: press the I button.
i
You can use automatic climate control to
set the airflow in the rear compartment
separately.
Switching the ZONE function on/off
X
To activate: press the á button.
The indicator lamp above the á button
lights up.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side.
3-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side
and the rear compartment.
X
To deactivate: press the á button.
The indicator lamp above the á button
goes out.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side.
3-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side and
the rear compartment.
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
Switch off the "defrosting" function as soon
as the windshield is clear again.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R
heating with dehumidification on
R
high airflow (depending on the outside
temperature)
R
high temperature (depending on the
outside temperature)
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. The heating with air
dehumidification function remains on. Air-
recirculation mode remains deactivated.
or
X
Press the à button.
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
X
Turn controls : or B clockwise or
counter-clockwise (
Y
page 125)
(THERMATIC automatic climate control),
(
Y
page 127) (THERMOTRONIC automatic
climate control ).
or
X
Press the K or I button.
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
Operating the climate control systems
131
Climate control
Z