beautypg.com

Opening and closing, Side windows – Mercedes-Benz SLK-Class 2014 Owners Manual User Manual

Page 86

background image

If someone is trapped:

X

Release the & button immediately.

X

Press and hold the % button until the

side windows open again.

You can use the SmartKey to open or close

all side windows simultaneously.

X

Close the roof (

Y

page 87).

X

Open the trunk partition (

Y

page 88).

X

Vehicles without KEYLESS-GO: point the

tip of the SmartKey at the door handle on

the driver's door.

X

Vehicles with KEYLESS-GO: the

SmartKey must be within 6 ft (2 m) of the

vehicle.

X

To open all side windows: press

the % button on the SmartKey until the

side windows are fully opened.

X

To interrupt the opening procedure:

release the % button.

X

To close all side windows: press the

& button on the SmartKey until the side

windows are fully closed.

X

To interrupt the closing procedure:

release the & button.

Convenience closing with KEYLESS-GO

G

WARNING

When using the convenience closing feature,

parts of the body could be trapped in the

closing area when a side window is being

closed. There is a risk of injury.
Observe the complete closing procedure

when the convenience closing feature is

operating. Make sure that no body parts are

in close proximity during the closing

procedure.

If someone is trapped:

X

Release the recessed sensor surface on the

door handle immediately.

X

Pull the door handle immediately and hold

it until the side windows open again.

With KEYLESS-GO you can close all side

windows simultaneously. The KEYLESS-GO

key must be outside the vehicle. All the doors

must be closed.

X

Touch recessed sensor surface : on the

door handle until the side windows are fully

closed.

i

Make sure you only touch recessed

sensor surface :.

X

Make sure that all the side windows are

closed.

X

To interrupt convenience closing:

release recessed sensor surface : on the

door handle.

Resetting the side windows

If a side window can no longer be closed fully,

you must reset it.

X

Close all the doors.

X

Turn the SmartKey to position 1 or 2 in the

ignition lock.

X

Pull the corresponding switch on the door

control panel until the side window is

completely closed. (

Y

page 82)

X

Hold the switch for an additional second.

If the side window opens again slightly:

X

Immediately pull the corresponding switch

on the door control panel until the side

window is completely closed (

Y

page 82).

X

Hold the switch for an additional second.

X

If the corresponding side window remains

closed after the button has been released,

84

Side windows

Opening

and

closing