beautypg.com

Driving and parking, Driving – Mercedes-Benz SLK-Class 2014 Owners Manual User Manual

Page 146

background image

If cylinder shut-off is not active, the engine

will operate with all eight cylinders. In this

case, the number of active cylinders 8 is

shown in the ¤ symbol.

Automatic engine switch-off

Method of operation
The ECO start/stop function is operational

and the ¤ symbol is displayed in green in

the multifunction display, if:

R

the indicator lamp in the ECO button is lit

green.

R

the outside temperature is within the

comfort range.

R

the engine is at normal operating

temperature.

R

the set temperature for the vehicle interior

has been reached.

R

the battery is sufficiently charged.

R

the system detects that the windshield is

not fogged up when the air-conditioning

system is switched on.

R

the hood is closed.

R

the driver's door is closed and the driver's

seat belt is fastened.

If not all conditions for automatic engine

switch-off are fulfilled, the ¤ symbol is

shown in yellow.

i

All of the vehicle's systems remain active

when the engine has been stopped

automatically.

i

All vehicles (apart from AMG

vehicles): automatic engine switch-off can

take place a maximum of four times

consecutively (initial stop then repeated

three times). The ¤ symbol is shown in

yellow in the multifunction display after the

engine has been started automatically for

the fourth time. When the ¤ symbol is

shown in green in the multifunction display,

automatic engine switch-off is again

possible.

i

AMG vehicles: times which the engine

can be automatically switched off.

i

The HOLD function can be activated if the

engine has been switched off

automatically. It is then not necessary to

continue applying the brakes during the

automatic stop phase. When you depress

the accelerator pedal, the engine starts

automatically and the braking effect of the

HOLD function is deactivated.

Vehicles with manual transmission

The ECO start/stop function switches off the

engine automatically at low speeds.

X

Brake the vehicle.

X

Engage neutral N (follow gearshift

instruction : to engage neutral N, if

necessary).

X

Release the clutch pedal.

The engine is switched off automatically.

Vehicles with automatic transmission
If the vehicle is braked to a standstill in D or

N, the ECO start/stop function switches off

the engine automatically.

Automatic engine start

Method of operation
The engine starts automatically if:

R

you switch off the ECO start/stop function

by pressing the ECO button.

R

you engage reverse gear R.

R

you switch to drive program S or M (AMG

vehicles).

R

you unfasten your seat belt or open the

driver's door.

R

the vehicle starts to roll.

144

Driving

Driving

and

parking