Mercedes-Benz SLK-Class 2014 Owners Manual - Manual (Page 205)

Switching the additional speedometer
on/off
Only vehicles with manual transmission have
this function.
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Additional Speedometer [mph] Additional Speedometer [mph]
function.
You will see the selected setting: On On or
Off Off .
X
Press the a button to save the setting.
i Speed is displayed in mph.
The Additional Speedometer [mph] Additional Speedometer [mph]
function allows you to choose whether the
status area in the multifunction display
always shows the speed in mph mph instead of the
outside temperature.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display Permanent Display function.
You will see the selected setting Outside Outside
Temperature Temperature or Additional Additional
Speedometer [km/h] Speedometer [km/h] / Additional Additional
Speedometer [mph] Speedometer [mph] .
X Press the a button to save the setting.
i The speed is displayed in km/h/mph.
Lights
Setting the daytime running lamps
i This function is not available in Canada.
X Press the = or ; button on the
steering wheel to select the Sett Sett menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Daytime Running Lights Daytime Running Lights function.
If the Daytime Running Lights Daytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction
display are shown in orange.
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 109).
Switching Adaptive Highbeam Assist on/
off
X Press the = or ; button on the
steering wheel to select the Sett Sett menu.
X Press the : or 9 button to select the
Lights Lights submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Adaptive Highbeam Adaptive Highbeam function.
If the Adaptive Highbeam Adaptive Highbeam function has
been switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.
X Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y
page 113).
Setting the brightness of the ambient
lighting
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X
Press the : or 9 button to select the
Lights Lights submenu.
X Press a to confirm.
Menus and submenus
203
On-board
computer
and
displays
Z