Clarity D704 - Manual (Page 12)

20 21
Make a Call
1. Pre-dialing
Enter the phone number first, then press or
to dial out the number. Press or
to clear the entry.
2. Direct Dialing
Press or to access dial tone, then enter
the phone number.
3. Dial a speed dial number
In idle mode, press and hold a dial pad key (0 through 9) to display the
desired speed dial entry.
The handset automatically dials out the displayed number.
- OR -
Press to stop dialing the displayed number.
Note: You need to set the speed dial number first. If the speed dial
location you selected is empty, the screen shows the speed dial list
instead.
4. Call from Directory
1. In idle mode, press to access the directory. Alternatively, press
2. Press or to select the desired directory entry.
3. Press or to dial out to the selected
entry.
5. Call from the Call Log
1. In idle mode, press to access the call log. Alternatively,
press
2. Press to select the desired call log entry.
3. Press or to dial out to the
selected entry.
6. Call from the Redial List
1. In idle mode, press to access the redial list.
2. Press or to select the desired redial number.
3. Press or to dial out to the selected
number.
Note:
Your handset automatically times the duration of every call. The call
timer will display a few seconds after the call has been made. It is shown
in hours, minutes and seconds format.
Temporary tone dialing
If you have pulse (rotary) dialing service only, you can temporarily switch from
pulse to touch-tone dialing during a call.
During a call, press <*>. Buttons pressed after this send touch-tone signals. The
telephone automatically returns to pulse dialing mode after you end the call.
Answer a Call
When the phone rings, press to use the earpiece
- OR -
Press > to use the speakerphone.
End a Call
During a call connection on handset, press to end
the call.
- OR -
Put the handset on the base station to end the call.
USING YOUR PHONE USING YOUR PHONE