Microsoft windows installation – Mediasonic HUR1-SU3S2 User Manual

Page 7

Text mode
Original mode

Microsoft Windows Installation

Disk Initialization

Single mode (Non-RAID) - 2 New Simple Volumes

New simple volume / Partition

Single Mode - New simple volume

Start Search input diskmgmt.msc at “Start Search”

Microsoft Windows Installation

Microsoft Windows
•Before connecting to the PC, please refer to the Hard Drive Assembly
Procedures for RAID set-up.
•If HDD is pre-installed by our vendor; users can connect directly to PC
and start using the unit.
•If users wish to change the setting, please refer to the Hard Drive Assembly
for correct way of setting.
• Turn on PC and start Windows system.
• Connect the device with USB(or e-SATA) cable and the power adapter.
• Windows will search and install drive in “Disk Management”.

Note:
For 2TB Hard drive, users must format in GPT Partitions and use
Windows Vista or Windows 7 in 64bit.