Harbor Freight Tools Model 94996 User Manual
Page 6
Page 6
SKU 94996
For technical questions, please call 1-800-444-3353
9. Connect the air hose from the air compressor (not supplied) to the Air Inlet (upper
right side of Tank). Please note: Only use compressed air with the Paint Spray Gun
Washer.
10. Turn on the air compressor and set its pressure to 40 PSI.
11. Turn the Air Inlet Switch (next to air supply hose) to the on (air flow) position. Cleaning
will begin. Under normal conditions, cleaning should take one minute. Dirtier units
may take longer.
Turning the System Off
1. Turn off the Air Inlet Switch (upper right side of Tank). See photo below.
2. Turn off Output Hose Switch.
3. Open Tank Lid and remove clean Spray Gun and Cup.
4. When finished with the Washer, disconnect from the air supply.
REV 07g, 07j, 08d
- 2696 (4 pages)
- 92353 (8 pages)
- 04095 (14 pages)
- 92126 (12 pages)
- 42977 (4 pages)
- 67422 (2 pages)
- 40089 (4 pages)
- 65076 (18 pages)
- 6510 (16 pages)
- PROFASSIONAL 47214 (16 pages)
- 31877 (11 pages)
- HEAVY-DUTY 1/2" VSR DRILL 3273 (16 pages)
- CENTRALPNEUMATIC 97526 (10 pages)
- 18 GAUGE BRAD NAILER 68021 (18 pages)
- ONE STOP GARDENS 95692 (8 pages)
- 91054 (12 pages)
- 93100 (16 pages)
- 42597 (9 pages)
- 90310 (5 pages)
- 90320 (2 pages)
- 93142 (12 pages)
- 94434 (12 pages)
- CENTRAL PNEUMATIC 93305 (16 pages)
- 03664 (11 pages)
- 92421 (14 pages)
- 45949 (12 pages)
- 35559 (10 pages)
- CENTRAL MACHINERY 45861 (41 pages)
- MINI BENCH 4019 (14 pages)
- 47706 (7 pages)
- 67046 (12 pages)
- BENCH GRINDER 39797 (16 pages)
- 7528 (8 pages)
- 93197 (9 pages)
- 31849 (17 pages)
- Warrior 11 Piece Carbon Steel Hole Saw Set 68114 (4 pages)
- 54425 (10 pages)
- Pittsburgh Self-leveling Laser Level 69243 (8 pages)
- Drillmaster Palm Sander 98622 (12 pages)
- 50 FOOT DRAIN CLEANER WITH POWER FEED 68284 (24 pages)
- 65673 (16 pages)
- Chicago 46237 (19 pages)
- 93853 (18 pages)
- Drill Master 18V 3/8" Cordless Drill 67024 (12 pages)
- CENTRAL PNEUMATIC 92007 (10 pages)