Harbor Freight Tools Model 94996 - Manual (Page 2)

Page 2 SKU 94996 For technical questions, please call 1-800-444-3353
Specifications
Solvent Tank 2.5 gallons
Tank Capacity One spray gun and one cup
Working Air Pressure 40 PSI
Maximum Air Pressure 60 PSI
Air Hose Size ¼ inch
Overall Dimensions 14-1/2 (L) x 18 (W) x 30-1/2 (H) inches
Weight 27 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
3. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
4. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
5. Dress properly. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
6. Use eye protection. Always wear ANSI approved impact safety goggles and a full
face shield. Wear an ANSI approved dust mask or respirator when working around
chemical dusts and mists.
7. Do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.
8. Maintain tools with care. Follow instructions for lubricating and changing
accessories. Inspect tool cords periodically and, if damaged, have them repaired by
an authorized technician. The handles must be kept clean, dry, and free from oil and
grease at all times.
9. Disconnect air supply. Unplug tool from air supply when not in use.
REV 07g, 08d