Kontron MOPSlcdLX - Manual (Page 19)

KTD-S0006-B Page 16 JIDA32 Interface
MOPSlcdLX Software Guide
6.5 Hardware Monitor Part
The hardware monitor part contains in most cases several subsections.
Section Sensor Count
Temperature 2
Fan Not supported
Voltage Not supported
6.5.1 Temperature
The term On-Chip diode designates the chip temperature of the temperature sensor (with no dependence to
the CPU temperature).
Sensor Number Abs. Thermal Limit
On-Chip diode 0 0 to +125 0 C
CPU diode 1 0 to +80 0 C
6.6 Watchdog Part
The watchdog can be programmed with discrete timeout values on boards with CPLD implementation or in
millisecond resolution with boards using a Super-I/O. In the discrete value scenario, if there is no exact
match to the timeout value, the next higher one is used.
Type Steps Timeout Values Result
Super-I/O
every
200 ms
1 second to 254
minutes
RESET
NMI not supported