Kontron MOPSlcdLX - Manual (Page 18)

KTD-S0006-B Page 15 JIDA32 Interface
MOPSlcdLX Software Guide
Bus Number Technology Type Device Count
0 I2C (primary) JIDA 1
1 SMBus Generic 2
2 I2C JILI 1
6.3.1 Bus Number 0 (JIDA)
This bus allows access to the JIDA EEPROM in which KONTRON specific manufacturing parameters are
stored. A damage of these parameters leads to a loss of warranty. Due to this a write cycle may only be
performed above a defined address.
Device Address Size Read Access Write Access
JIDA EEPROM A0h 512 Bytes Yes No, forbidden
6.3.2 Bus Number 1 (Generic)
Through this bus several devices can be handled.
Device Address Size Read Access Write Access
LM86 98h 256 Bytes Yes Yes
SPD EEPROM A0h 256 Bytes Yes No, forbidden
6.3.3 BusNumber 2 (JILI)
The JILI EEPROM refers to the LCD/LVDS interface. It contains the panel specific timing parameters (e.g. a
DisplayID
TM record).
Device Address Size Read Access Write Access
JILI EEPROM A0h 512 Bytes Yes Yes
6.4 CPU Performance Part
This part implements power management functions. The CPU frequency and the CPU throttling can be con-
trolled.
Function Supported
CPU throttling No
CPU frequency No